HAND TOOLS
Tenon saw
Main Use
The main use of the Tenon saw is to cut bits of wood with out using a machine.
Safety Operating Procedure
Potential Hazards
Main Use
The main use of the Tenon saw is to cut bits of wood with out using a machine.
Safety Operating Procedure
- hair must be tied up
- no baggy clothing
- safety glasses
- no jewelry
Potential Hazards
- cuts fingers off
- cuts/abrasions
- hair get caught
- injury to others
Jack Plane
Main Use
the main use of the jack plane is to flatten bits of wood and it takes thin shavings of wood each time making it flatter and flatter
Safety Operating Procedure
Main Use
the main use of the jack plane is to flatten bits of wood and it takes thin shavings of wood each time making it flatter and flatter
Safety Operating Procedure
- safety glasses
- no jewelry
- hair must be tied up
Potential Hazards - cut finger on blade
- cuts/abrasions
Bench Hook
Main Use
the main use od a bench hook is to cut bit of wood with a saw with out using a clamp or a vice.
How to Use it
It only requires you to steady and hold the bit of wood firmly against the barrier so you can cut it.
Main Use
the main use od a bench hook is to cut bit of wood with a saw with out using a clamp or a vice.
How to Use it
It only requires you to steady and hold the bit of wood firmly against the barrier so you can cut it.
Clamp
Main Use
the main use of a clamp is to hold things down so they don't move when you are cutting, chiselling bits of wood etc.
How to Use it
to use the clamp you need to push on the small metal bit which runs along the bar, this makes it bigger. then to lowly make it smaller you squeeze on the bit which looks like a gun.
Main Use
the main use of a clamp is to hold things down so they don't move when you are cutting, chiselling bits of wood etc.
How to Use it
to use the clamp you need to push on the small metal bit which runs along the bar, this makes it bigger. then to lowly make it smaller you squeeze on the bit which looks like a gun.
Vice
Main Use
the main use of a vice is to secure things so you can cut them etc. it s very similar to a clamp except a vice is attached to a bench and it is more stable.
How to Use it
to use a vice you must first loosen the two sides by turning the round metal rod at the front. When the gap is big enough to fit you piece of material you then place it in between the two bits. Then you tighten the vice by turning the round rod in the opposite direction.
Main Use
the main use of a vice is to secure things so you can cut them etc. it s very similar to a clamp except a vice is attached to a bench and it is more stable.
How to Use it
to use a vice you must first loosen the two sides by turning the round metal rod at the front. When the gap is big enough to fit you piece of material you then place it in between the two bits. Then you tighten the vice by turning the round rod in the opposite direction.
Sanding Block
Main Use
the main use of the sanding block is so that when your sanding it is flat instead of bumpy
How to Use it
To use the sanding block all you need to do is wrap a bit of sand paper around it and sand your bit of wood.
Main Use
the main use of the sanding block is so that when your sanding it is flat instead of bumpy
How to Use it
To use the sanding block all you need to do is wrap a bit of sand paper around it and sand your bit of wood.
Chisel
Main Use
The main use of the chisel is to crack small bits of a piece of wood at a time e.g. you need to make a corner
How to Use it
To use a chisel you need to hit the non sharp end with a mullet which causes the mullet to hit the wood with more force so a bit of wood chips off.
Potential Hazards
Main Use
The main use of the chisel is to crack small bits of a piece of wood at a time e.g. you need to make a corner
How to Use it
To use a chisel you need to hit the non sharp end with a mullet which causes the mullet to hit the wood with more force so a bit of wood chips off.
Potential Hazards
- stab yourself/someone else
- cuts/abrasion
- bits chipped wood flying
Mallet
Main Use
To hammer wood together or to hammer a chisel etc. NEVER use a mallet for a metal nail because it will put a hole or mark into the mallet. remember wood on wood and metal on metal (normal hammer on nails).
Main Use
To hammer wood together or to hammer a chisel etc. NEVER use a mallet for a metal nail because it will put a hole or mark into the mallet. remember wood on wood and metal on metal (normal hammer on nails).
Hand Router Plane